Green Flexible TPE

Uglymonkey Green Flexible filament for 3D Printers.  High quality, constant diameter, bright uniform colours for accurate repeatable prints.  The filament comes on a plastic spool and is sealed in a vacumed sealed bag plastic bag with dececant and packaged in a Uglymonkey box. Each spool is marked with the type of filament, the recommended printing temperatures.  We have a lot of confidence in the filament we supply, because we use it ourselves.  This filament is manufactured from the Highest Quality RAW materials

This flexible filament can be used to print the most amazing things, from wearable items, cell phone covers, toys, grips for handles, tires for R/C cars, pulley belts to shoes!  It might be tricky to feed the filament at the beginning due to the flexibily of the filament, so the filament should be supported from the extruder gear to the hot end with a PTFE tube. Slow printing speeds are required (20-30mm/s) and print with a larger layer height. We recommend 200 Microns or thicker.

Specifications:

• Amount: 0.5kg
• Colour: Green
• Diameter: 1.75mm
• Tollerance: +- 20 Micron
• Manufactured from: Thermoplastic Elastomer (TPE)
• Recommended printing temperature: 235 Deg C (Please note the box says 190-220 That is a printing error)
  
• Recommended bed temperature: 60 Deg C
• Recommended Speed :50mm/s on the Uglymonkey 3D Printers.
• Recommended bed preparation: Hairspray on glass
• Spool dimensions: OD = 200mm, ID = 57mm, Width = 45mm
• Note: An additional cooling fan can be used, but is not required.

Density: 1.25g/ cm³

hydroscopicity： 0.5%

tensile strength: ≥33Mpa

flexural modulus ≥33Mpa

flow velocity: 3-7/10min